Creeper Wheels Tech

Made of superior formulation HYPER-FLEX™ polyurethane and uses high precision bearings. Experience little or no rolling resistance! The unique polyurethane material and design allows smooth, unimpeded rolling for indoor/outdoor ease of movement–over cracks, washers, misc. debris, etc.

• Fits Most Standard Caster Assemblies.
• Available in red or black with Cool Side Graphics.
• Rides on precision ABEC high quality bearings.
• Installs in a few minutes with two 5/32” hex wrenches (not included).
• All hardware is included.
• Firm In The Center Yet Soft On The Outside
• Allows Flex And Pivot When Needed

HYPER-glide™ Creeper Wheels Are Valuable To Use For:

• Automotive-Type Mechanic Creepers
• Small Tool Chests & Trays
• Many Kinds Of Seats With Caster Wheels
• Various Types of Table & Rack Carriers That Use Caster Wheels

How To Identify The Correct Size For Your Device:

HYPER-glide™ wheels will fit most standard caster assemblies. Always use the largest wheels that will fit. NOTE- Recommended maximum weight allowed is 125 lbs. per wheel. Requires two 5/32” hex key wrench (not included).

Measuring the caster wheel horn (cover) from the center of the mounting hole to the nearest inside obstruction under horn: If the top (A) measurement is greater than 1”/25.4mm and the inside width (B) of the of the caster horn is approximately .839’’ to 1”- (the 2”/50mm HYPER-glide™ wheel sets will fit). If the top (A) measurement is greater than 13/16”/30mm and the inside width (B) of the of the caster horn is approximately .839’’ to 1”- (the 23/8”/60mm HYPER-glide™ wheel sets will fit). Visually inspect the caster horn to see that its holes (C) are not too large or small (.250”min.-.265”max.) to accept the supplied screws.